Pneumatic actuator Series PAS; ATEX II 2 G/D; Single acting; Rotation angle 90°; According to ISO 5211/NAMUR; Operating pressure range Max. 8bar; Diameter 160mm; Flange ISO5211 F10/F12; Female square 27mm; Torque at 5,5bar 143Nm
Pneumatic actuator Series PAS; ATEX II 2 G/D; Single acting; Rotation angle 90°; According to ISO 5211/NAMUR; Operating pressure range Max. 8bar; Diameter 160mm; Flange ISO5211 F10/F12; Female square 27mm; Torque at 5,5bar 143Nm
Technical specifications
| Diameter | 160 mm |
|---|---|
| Flange ISO5211 | F10/F12 |
| Female square | 27 mm |
| Control pressure | 5,5...8 bar |
| Diameter | 160 mm |
| Flange ISO5211 | F10/F12 |
| Female square | 27 mm |
| Control pressure | 5,5...8 bar |
| Design | ATEX |
PAS1603
Documents
1 Documents
Language-independent
CAD / 3D
1-
STP
CADSTEP · PAS1603
CAD-STEP 5,6 MB Updated 15/11/2026
Accessory Products
Select accessories for ABS51
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.
Select accessories for ABS51-LT
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.
Select accessories for ABS53
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.
Select accessories for ABS54
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.
Select accessories for ABS54-HT
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.
Select accessories for ABS54-LT
Select the accessories you need. If the combination exists as a ready-made variant, you go straight to it; otherwise the articles go into the cart separately.